Electric concrete pumps are very much necessary in a construction project. It is necessary for you to know how exactly these electric pumps and concrete mixer with pump work for you to operate that. You should also have good idea on how you can protect the equipment and job site when you are setting it up for the work and also for cleaning that well. It is necessary for you to understand how you should set things up and also should be cleaning the equipment well so that it do not get ruined with time. Here are the major tips for getting the concrete pump cleaned.
Visualizing When the Work is About to Finish
The operator is responsible for observing the working of the machine so closely so that they get the idea when they should stop pumping. If you have the whole hopper and a hose of 200 feet in the concrete electric or mini concrete pumps for sale, then you may need to know that you get one quarter of the yard of about 5 wheelbarrows. When job is to get completed and away from 5 wheelbarrows then you should stop pumping. This is necessary so that things can really work well for you and you can even do the cleaning in faster pace and with great ease.
The mixer truck driver should be given proper instructions so that pouring concrete can be stopped and they can actually start getting the equipment washed properly. It is necessary for you to ensure that you get this done in much better manner. Once when he stops pouring the concrete, then it is time for washing the small concrete pump down. This can actually be of much help for you to get the cleaning done easily.
Water for Cleaning Hose
It is now time for you to pump hopper down as lower as possible. Hopper should then be filled with eater and then should start pumping through the pipelines of electric concrete pump so that water can be utilized for pushing off concrete which is left behind in hose. If it is not done then just with air, hose cannot become really clean. You should be going to the guys who hold hose for instructing them to stop whenever they water. You should then check whether the hoses are free from concrete. It is not a good idea to leave the hose uncleaned after the work else it can spoil the hose.
Once when you are sure that the hoses are free from concrete, it is time for disconnecting hopper from them. You should then wash hopper as well as should stick the sponge ball for cleaning electric or mobile concrete pump in reducer. You should then fill the hopper with so much of water for pushing the cleaned sponge down system and thus cleaning all hoses. It is necessary to use sponge ball that is really larger in size such that it is bigger than hose. When ball comes out of other end, clean last hose’s ends and then disconnect system. It is also necessary to grease this machine after every usage.